Palet FM 300 + heatsink + LPF

Modul FM mrfe6vp6300h
Power output ( nominal) 300 Watts
Frequency 88 -108MHz
Power Gain 20dB typical
Power Input 2.5 - 5 watt
Efficiency 85% typical
Power Volts 48V
Drain current 8 Amps
Input VSWR 1.4: 1 typical
Power Gain 5dB MAX

Modul sudah diheatsink ukuran 12 x 30cm
Sudah ditest tinggal pasang gan....!

untuk harga klik link toko pedia

FTC 4K

4KW Digital FM Transmitter Digital modulator(DDS), stereocoder and built-in RDS encoder, High efficiency (Less energy consumption, Less heating), Extra power supply for control system, Broadband (87.5-108MHz).

FTC4K has a digital modulator (DDS)including stereo encoder and RDS encoder.
TA, TP and PTY can be set via GPIO inputs connecting ON/OFF switches.
There are 8 memories to save frequency, power etc. and these memories can be selected by GPIO pins. 

FTC 2k

2KW Digital FM Transmitter Digital modulator(DDS), stereocoder and built-in RDS encoder, High efficiency (Less energy consumption, Less heating), Extra power supply for control system, Broadband(87.5-108MHz).

FTC2K has a digital modulator (DDS)including stereo encoder and RDS encoder. TA, TP and PTY can be set via GPIO inputs connecting ON/OFF switches. There are 8 memories to save frequency, power etc. and these memories can be selected by GPIO pins. 

FTC 1k

1KW Digital FM Transmitter Digital modulator(DDS), stereocoder and built-in RDS encoder, High efficiency (Less energy consumption, Less heating), Extra power supply for control system, Broadband(87.5-108MHz).

FTC1K has a digital modulator (DDS)including stereo encoder and RDS encoder. TA, TP and PTY can be set via GPIO inputs connecting ON/OFF switches. There are 8 memories to save frequency, power etc. and these memories can be selected by GPIO pins. 

FTC 600

600W Digital FM Transmitter Digital modulator(DDS), stereocoder and built-in RDS encoder, High efficiency (Less energy consumption, Less heating), Extra power supply for control system, Broadband(87.5-108MHz).

FTC600 has a digital modulator (DDS)including stereo encoder and RDS encoder. TA, TP and PTY can be set via GPIO inputs connecting ON/OFF switches. There are 8 memories to save frequency, power etc. and these memories can be selected by GPIO pins.

FTC 300

300W Digital FM Transmitter Digital modulator(DDS), stereocoder and built-in RDS encoder, High efficiency (Less energy consumption, Less heating), Extra power supply for control system, Broadband(87.5-108MHz).

FTC300 has a digital modulator (DDS)including stereo encoder and RDS encoder. TA, TP and PTY can be set via GPIO inputs connecting ON/OFF switches. There are 8 memories to save frequency, power etc. and these memories can be selected by GPIO pins. 

FTC 25

25W Digital FM Exciter Digital modulator(DDS), stereocoder and built-in RDS encoder. Broadband(87.5-108MHz).

FTC25 has a digital modulator (DDS)including stereo encoder and RDS encoder. TA, TP and PTY can be set via GPIO inputs connecting ON/OFF switches. There are 8 memories to save frequency, power etc. and these memories can be selected by GPIO pins. 

Mini Phone Hybrid

Mini Hybrid untuk siaran radio dengan audio output yang cukup sempurna untuk melengkapi siaran radio anda.
Call.

HM 48B

Microphone Standard Broadcasting

Paket Pemancar FM 300 Watt

Pemancar FM Stereo dengan dilengkapi protek SWR dengan daya maximum 300 Watt memakai tabung.

Accesories :

• LCD setup
• 2 by Antenna Gamma (T)
• Heliax 1/2" 30m

Paket Pemancar FM 500 Watt

Pemancar FM stereo Dengan dilengkapi protek SWR dengan daya maximum 500 Watt memakai tabung.

Accesories :

• LCD setup
• 4 by Antenna Gamma (T)
• Heliax 1/2" 50m
• 4 Jumper 1/2"
•  Power Divider N to N female

Breket Antenna V / Y

Ukuran Aluminium 1 inchi tubing

Solidyne D816 Digital ON AIR console

10/12 channels: 3/6 MIC channels, 4 Line channels, 3 phone hybrids in conference<
2 USB digital inputs, 2 USB digital outputs.
4 electronic VU-meters,
4 bands EQ and audio compressor for MIC channels.

The D816 console is a landmark in technology for the new radio studios with low budgets. D816 is the Digital Radio console with the lower cost at the international market, offering digital USB In/outs and balanced analog in/outs that cover all the needs for medium size radio studios. Production and News studios at large broadcasting stations will find in D 816 an excellent solution. All faders are VCA controlled. It includes 3 telephone Hybrids; two for land lines and one for cellular phone

The console has independent stereo outputs for AIR and Recordings.
This way you can make two tasks at the same time.
Four electronic VU-meters of comfortable reading indicate the levels of both outputs.

The connection of USB ports can be made in one or two computers. The visual indicator informs that the computer has recognized the console. If it indicates C4 there are 4 digital channels. Showing C8 it indicates 8 channels (2 stereo in PLAY and 2 stereo in REC). It has a VU-meter that indicates the microphone compression level, which allows you to have the same sound level for all speaker's voices.

ETM-VCA Technology
Unlike other consoles, the D816 uses indirect control in all the audio channels. That is; the faders do not handle audio, but DC that commands a stereo amplifier of variable gain. The ETM-VCA technology and the use of the new Conductive Ceramic faders gives your radio 15 years of free maintenance operation and eliminates the noise caused by wearing down, even at the end of its life.

Phantom 48V

All condenser microphones can be used with the D816, since it incorporates a 48 volts switching phantom power supply.

Twin MIC preamplifierbr /> MIC preamplifiers were designed for supporting two parallel MIC's of the same model controlled from one fader. Then, the console can manage up to 6 microphones controlled from 3 faders. Internal audio compressors allows the console to have the same audio level in all Mic's.

The D816 console is also unique by its dimensions. Electronic components of advanced technology allow us to assemble the thinner profile console at the market (about 15 mm). This feature avoids the need of cutting the operation desk for a comfortable operator's position.

Pemancar FM 3000 watt

Pemancar FM buatan Indonesia yang didesign khusus untuk memuaskan konsumen, sehingga menyerupai buatan luar negeri.
kualitasnyapun tak kalah bagus dengan buatan luar negeri.
Pemancar ini didesign untuk power tinggi menggunakan Tube 3CX300A7, sehingga power output maksimal bisa 3000 watt

BW Broadcast TX1000 FM Transmitter

Description :

The TX1000 is a lightweight and efficient rack-mountable FM Transmitter. Only 3U and 500mm deep, the TX1000 breaks the rules on size!

Designed for FM Broadcasters, the TX1000 has a graphical LCD controller on the front panel for easy control of power and monitoring of system variables including indicated frequency, forward and reverse power, power amplifier temperature, power amplifier voltage, PLL board voltage, modulation levels as well as the amount of gain reduction of the internal audio limiter module.

The Frequency is adjustable from 87.5 to 108 MHz via internal direct reading switches or from the front panel graphics display control system. Setting the frequency internally disables the menu system from changing the frequency ensuring no unauthorised frequency changes.
The transmitter is fully configurable and the limiter and stereo encoder can be switched in and out of circuit. Jumpers available on board for pre emphasis, clipping, processing mode clarity/loud, stereo/mono, and limiter on/off.

The Rear panel has a BNC connector for RF input and N-Type for RF output. The rear panel RS232 connection allows the transmitter to be controlled and monitored from a standard terminal program or our custom windows application.

The RS232 control and monitor system is a dual mode system which allows the TX1000 to be controlled and monitored from a standard terminal program or our custom windows application.

The 'virtual VFO' dual loop PLL system allows perfect audio flatness to below 10 Hz. AFC bounce and modulator overshoot are a thing of the past. You now can pass that low bass without distortion and overshoots and obtain that extra low frequency stereo separation.The power amplifier is based on a modern MOSFET device and a fresh air tunnel through the transmitter keeps cool air running right through the heatsink keeping the transistor and the amplifier cool. The amplifier is protected from damage by temperature control systems and antenna fault (VSWR) monitoring which react to any fault by reducing the output power to a safe operating level keeping you on air rather than shutting down completely. Internal harmonic filtering keeps your RF signal clean and compliant to CE/FCC/EU standards.

Mains Voltage input is via an EMI filtered IEC power connector which feeds two fully approved efficient switched mode power supply modules with an input voltage range from 200-240 Volts AC.

The above transmitter can also be supplied with an FSK ID keyer input for use in FM translator applications. A back panel connection allows external morse code generator units to shift the frequency of the transmitter in accordance with FCC regulations for translators. More information and costs for this option are available from our sales department.

RVR TEX502LCD Solid State FM Transmitter

Description :

This TEX502LCD FM Transmitter has digital user interface to diagnoste and control all the parameters displayed (frequency, output power, measurement, etc.). Adjustable power output from 0 to 500 W. On-air under any VSWR conditions thanks to Foldback control. Low cost with high performance Available with 2 SCA/RDS input connectors. Built-in stereo coder with high perfomance. Only 3HE.

Features :

• Digital user interface to diagnose and control all the parameters displayed (frequency, output power, measurement, etc…).
• Adjustable power output from 0 to 500 W. On-air under any VSWR conditions thanks to Foldback control.
• Low cost with high performance
• Available with 2 SCA/RDS input connectors.
• Built-in stereo coder with high perfomance.
• Only 3HE.

• Fully integrated telemetry and SMS alarms with built-in GSM modem and battery for the battery charger
   

FM: NVLT Series 3.5 – 40 kW

Outstanding Efficiency at Exceptional Value

Meet the new NVLT Series for analog FM broadcasting.
Proven NV Series Architecture
Highest Efficiency in its Class: 72%
Intelligent VS Series Features
Exceptional Value
Based on the proven NV Series architecture, they’re built tough with integrated direct-to-digital exciter(s), parallel power amplifiers, parallel power modules and switching power supplies.
With the unmatched intelligent features of the VS Series including Nautel’s local/remote AUI control system via Ethernet the NVLT Series helps you save time, save trips and save money.
Each design is optimized to offer the features you want without the extra cost for external combiners, exciters, control systems, instrumentation, or system rack.
Add the highest efficiency in their class and the NVLTSeries packs more value than any comparable transmitter.

Nautel VS300 for LPFM

The most advanced Low Power FM transmitter available, Nautel’s VS300 is ideal for use by community, religious, educational and other non-profit radio groups. The award-winning VS300 transmitter recently received type certification from the FCC to be used in LPFM applications.

When designing the VS300 LPFM special consideration was given to the needs of Low Power stations. Nautel wanted to offer a transmitter that simplified the installation process and could be easily automated and controlled while providing the flexibility to broadcast any type of programming in any format imaginable.

With a strong history of supporting local radio Nautel is happy to be able to offer a product that has been designed to meet the unique needs of low power, community, and religious broadcasters. The VS300 for LPFM is a unique platform that eliminates many of the peripheral components that are often required even in a first time low power installation. This integration of components that traditionally required their own hardware greatly simplifies the set-up, operation and maintenance of a LPFM station and most importantly helps keep costs down.

The VS300 is a rack mountable 300 watt transmitter. At just 2 RU tall and weighing in at less than 25 lbs, the VS300 is very easy to handle and takes up very little room at the transmitter site.